Product

DTX-360/ DTX-600

Maker : ECI Telecom Ltd.

DTX-360
The DTX-360 is the flagship product of the ECI Telecom's DTX family which is an Intelsat IESS501-based DCME with a large installed base worldwide.

DTX-600
The DTX-600 is the ECI Telecom's new generation of DCME (digital circuit multiplication) product which is a voice and data multiplexing and transmission system supporting multiple rates.

Features

DTX-360
- Transmits speed, voice band data, and fax over up to 360 trunk channels, and provides a compression ratio of up to 10:1 for speech, and up to 6:1 for fax using standard or non-standard protocols.
- Supports ITU-T G/728-compliant LD-CELP mode and Rev3 (ADPCM) mode.
- Supports VBR (Variable Bit Rate) operation which is used when a bearer channel becomes congested.
- ITR-T Q.50-compliant data link interface and dynamic clear channel assignment.
- Multi-clique mode and multi-destination mode

DTX-600
- 20:1 toll-quality compression
- End-to-end compression
- Supports a variety of compression algorithms.
- Transmits up to 24-trunk bit stream over bearer channels.
- Supports spring algorithms to maximize the efficiency of bearer channels.
- Multiplexes toll-quality speech, fax, voice band data, and serial data.
- Support HDLC, PPP, FR, and IP traffic.
- Signaling monitor and conversion
- Expansible to the ECI Telecom xTX series (ATX, VoATM, ITX, and VoIP)
- Easier migration to a data network infrastructure

ATX-600
- Provides carrier-class telephony service over ATM networks.
- Up to 20:1 end-to-end compression for voice

DTX-600/60
- 20:1 end-to-end toll-quality compression for high-volume traffic routes and for thin routes.

DTX-360
- Expansible up to 10:1 capacity expansion, and IESS501 Rev.2 and Rev.3 compliant

DTX-240F
- 5:1 multiplication of digital transmission systems for point-to-point configuration
- Highly efficient in fax transmission

Figure of Network